Rowhouse rooftops in Washington, DC with solar panels, focusing on hail resilience considerations
solar panel maintenance

How to Prepare DC Solar Panels for Hail

Key Takeaway

Ask about panel test results, insurance terms, and safe inspection before and after a hailstorm.

— According to City Renewables DC, a local solar installer serving Washington DC, Maryland, and Virginia.

Can hail damage solar panels?

Hail can damage a solar array, although the risk depends on the storm, the equipment, and how the system is installed. A test certification is useful evidence about a module's performance under specified conditions; it is not a guarantee against every storm.

Before choosing equipment for a DC home, ask the installer for the manufacturer's hail-test documentation and discuss your roof and exposure. The U.S. Department of Energy's hail guidance ↗ explains why test conditions and potential storm severity matter.

What does a hail rating mean?

DOE describes the basic IEC 61215 hail certification test as using a 25 mm ice ball at 23 meters per second. Some manufacturers may offer results from other tests. Ask for the documentation for the exact panel model in your quote, and have the installer explain what was tested and what the results do and do not establish.

A successful laboratory test is not a promise that panels will survive hail of every size, speed, or impact angle. DOE recommends requesting evidence of testing beyond minimum requirements where severe hail risk warrants it.

What should you ask before installation?

  • Panel documentation: What hail test did this exact module pass? Ask for the test and manufacturer documents.
  • Roof and mounting: Has the installer assessed the roof and selected mounting equipment appropriate for the proposed array? Ask how the installation follows the equipment instructions.
  • Product warranty: What damage is covered, what is excluded, and how is a claim submitted?
  • Workmanship and roof coverage: Who is responsible for investigating or repairing roof or mounting damage? Get the terms in writing.
  • Insurance: Ask your insurer how your policy treats roof-mounted panels, hail damage, deductibles, and any coverage limits. Request the applicable policy language rather than assuming all policies cover the same events.

For a leased or program-supported system, ask the system owner or program administrator who handles inspections, insurance, and repairs. Responsibilities depend on the agreement.

What should you do after a hailstorm?

Stay on the ground and look for visible damage only from a safe location. Check the system's monitoring information if you have access, and save any error messages or production changes for the service provider.

If you suspect damage, contact the installer or a qualified solar professional. Do not climb onto the roof, touch damaged panels or wiring, or try to isolate electrical circuits yourself. Ask the professional whether further testing is appropriate and what the warranty process requires.

Contact your insurer promptly if you may need to make a claim. Keep photographs taken from a safe location, inspection findings, correspondence, and repair estimates. Your insurer can explain the applicable coverage and deductible.

A practical checklist

Keep the panel model and test documents, installation agreement, warranty information, monitoring access, and installer contact together. Before a storm, review the insurance terms; afterward, document concerns and ask qualified professionals to inspect the system.

If you are comparing solar proposals in Washington, DC, bring these questions to each installer and compare the written answers, not just the headline panel rating.